Identificador: 2308 Abierta

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM

AMXmachine

Contacte al vendedor

Descripción

PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM - BALA

New with warranty

Demo model with about 30 hours on it

Specifications

- Comes with digital readouts on the vertical and horizontal axis, readout in decimal inches or mm

- Processing sheets both horizontally and vertically

- Cutting height is 2100mm

- Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”

- Weight 2400 lbs

- Thickness of cut is 0-60mm

- Comes with main blade and scoring blade

- Motor hp is 4.0 (3 kW) three phase, 208/230 volts

- Needs to be hooked to external dust collection

- Moveable front panel supports. (Pneumatic automatic movement up and down using sensor system

- Bottom supports are metal wheels

- Machine comes with 1 year warranty

- Pneumatic locking of gantry and head

- Voltage is 230/208 volts, 3 phase.

- Dual scales, imperial and metric

- Gantry locks in position every 40" for vertical cuts

- Has a mid-shelf supports for cross cutting narrow boards, instead of putting on bottom rollers

Pago y Devoluciones

Forma de pago: Bank Wire Transfer

Publicar mensaje

Ingresar para hacerle una pregunta al vendedor.

AMXmachine

PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN

PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN USED - GOOD CONDITION Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on a common shaft - pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders, which require booster compressors, the Model SL36x60 reaches full capacity at 100-psi plant air pressure.Edge pressure is applied by eight push...

AMXmachine

PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"

PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...