ID: 2493
Open
.jpg)
.jpg)
.jpg)
PART: 1AM-1150-G – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTOR
AMXmachine
Description
PART: 1AM-1150-G – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTOR
New with warranty – 6-month warranty on manufacturing defects on mechanical parts only
Gasoline motor 13 HP
Maximum notcher size 9” long x 2-1/2” height x 1-5/8” depth
400 to 800 notcher/hr. approximate
Cutterhead with HSS knives installed - New design
Video: https://vimeo.com/805816822 - Electric Motor
Video: https://vimeo.com/805816822 - Gasoline Motor
Optional:
Honda Gasoline Motor
Please contact us for more details
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PARTE: 2MA-FP-4075CB – LIJADORA - CALIBRADORA DE METAL – 40” ANCHO - 2 LIJAS
PARTE:
2MA-FP-4075CB – LIJADORA - CALIBRADORA DE METAL – 40” ANCHO - 2 LIJAS
NUEVA CON
GARANTIA
Standard
Features:
Abrasive
belt size: 40” x 75”
Motorized
Table Lift
Variable
Speed Conveyor, inverter drive
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust
the tracking system when running extremely out of parallel belts
Heavy Duty
JackscrewTable Sup...
AMXmachine
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED
OPTIMIZING LINE
USED - VERY GOOD CONDITIONS
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS
THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width;
.25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap;
servo controlled up to 825 FPM.Saw: Blad...
AMXmachine
PARTE: 1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASE
PARTE:
1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 360 - 3060 RPMCHUCK: 1.5 A 13 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 150 MMCARRERA CHUCK: 65 MMDISTANCIA DEL CHUCK A LA MESA: 355 MMDISTANCIA DEL CHUCK A LA BASE: 495 MMDIMENSIONES DE LA MESA: CIRCULAR DE 255 MMDIMENSIONES TOTALES: 920 MM X 255 MM X 540 MMPESO: 38 KGSEMPAQUE: 1 CAJA