Identificador: 2515
Abierta
Descripción
PART: 12584 – BORING MACHINE - RITTER R246
USED – VERY GOOD CONDITION
2 Bottom vertical drill heads, each with 23 gear driven spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM spindle speed.
Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control.
Equipped with: 4 Overhead adjustable pneumatic holddowns on each head, 72" long "traveling" back fence system with 0" - 3" adjustment from rear head spindle center line, hand wheel adjustable - fence line & rear head move together or the rear head can be manually adjusted independent of the rear fence line.
2 Adjustable Heavy Duty material flip stops and 2 - 53" left & right fence extensions each with 3 adjustable material stops.
Each head with 49" long x 8" wide panel support table - front table moves with front drill head, above table tool change positions.
Includes & features: 10 mm Dia. spindle collets, single or double row drill head stroke control, foot pedal activated and magnetic push button motor starter with overload.
Dimensions: 72" L x 60" W x 52" H
Weight: 3,040 Lbs - estimate
Elect./Voltage: 220V, 60 Cy, 3 Ph.
Year MFG: 2004
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...
AMXmachine
CHAMBER HEAT TUNNEL - HOT AIR OVEN - WELDTRON – 6028
PART: AMX-10042 – CHAMBER HEAT TUNNEL - HOT AIR OVEN - WELDTRON – 6028
USED – GOOD CONDITIONS
MADE IN THE USA
MODEL # 6028
VOLTS: 230
CYCLE: 60
PHASE: 3
AMPS: 44
FWO: 31627
WATTS: 15
MANUFACTURER:
WELDTRON CORPORATION, NEW JERSEY, USA
TUNNEL
APERTURE: 7-1/2" HIGH X 22"WIDE
MACHINERY
DIMENSIONS: 76" LONG X 34" WIDE X 63" TALL - WEIGHT 662 LB
MACHINE WILL BE
WOOD PALLETIZED FOR SHIPPING
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MM
PARTE: 12110 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
9,100.00
AMXmachine
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORA
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORAStandard Features:ISO 9001 certifiedHP Heavy Duty AC main motor, 110VHeavy welded all steel construction for maximum rigidityStandard Pittsburgh AttachmentStandard Round Power Flange Attachment & Right Angle, Double Seam Rolland Drive Cleat Roll , all in one, no installation is required ACME side can be operated at same timeHeavy Duty caster wheels for easy movingOne year warranty for parts Standard Eq...