Identificador: 2518
Abierta
Descripción
PART: 12576-E – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
USED – GOOD CONDITIONS
Capacity: 75″ x 169″
Depth of Cut: 2″
Max. Blade Size: 8-5/8″(220mm)
Main motor 4 HP 230 volts three phase
Depth of cut 2” max
Scoring unit with insert knives
Saw head rotates 90 degrees for rip or cross cutting
Automatic shifting back grid
Two gauging bars with flip stop for midway fence
Bottom rollers with manual control for easy movement of larger panels
Approx. Shipping Weight: 2,500 Lbs.
Approx. Shipping Dimensions: 182″ L x 36″ W x 103″ H
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.jpg)
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 100 LARGO MM
PARTE: 12109 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 100 LARGO MMUSADOS – COMPLETOS - MUY BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
6,500.00
AMXmachine
LUMBER - CUT TO SIZE
LUMBER CUT TO SIZE15,000 - 17,000 foot - 5/8 X 3-1/4 X 64”
3,000 -
5,000 foot - 5/8 X 3-1/4 X 70”
Per truck load - every 2 weeksLUMBER FOR PALLETSGREEN OR AIR DRIED
AMXmachine
CHAMBER HEAT TUNNEL - HOT AIR OVEN - WELDTRON – 6028
PART: AMX-10042 – CHAMBER HEAT TUNNEL - HOT AIR OVEN - WELDTRON – 6028
USED – GOOD CONDITIONS
MADE IN THE USA
MODEL # 6028
VOLTS: 230
CYCLE: 60
PHASE: 3
AMPS: 44
FWO: 31627
WATTS: 15
MANUFACTURER:
WELDTRON CORPORATION, NEW JERSEY, USA
TUNNEL
APERTURE: 7-1/2" HIGH X 22"WIDE
MACHINERY
DIMENSIONS: 76" LONG X 34" WIDE X 63" TALL - WEIGHT 662 LB
MACHINE WILL BE
WOOD PALLETIZED FOR SHIPPING
AMXmachine
PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504
PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY
G0504
In Good Running Condition
& Ready to ShipMain motor: 25HP, 220V/440V*
(prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump -
Main Saw Motor - 25HPMaximum cutting capacity:
10" x 16"Distance from blade to
conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x
1" WSaw blade speed: 7300 FPMFloor to table height:
40"Infeed table: 106" L x
16" WInfeed belt: 215-3/4" ...