Identificador: 1106
Abierta
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
PART: 12008-E – PALLET ASSEMBLY AND STACKER – INCLUDES 3 GUNS - RAYCO INDUSTRIES INC
AMXmachine
Descripción
PART: 12008-E – PALLET ASSEMBLY AND STACKER – INCLUDES 3 GUNS - RAYCO INDUSTRIES INC
Used – Good condition
440V, 3 Phase
Approximate space assembled: 16 x 16 feet
3 guns, stacker and exit racks included
VIDEO 1: https://vimeo.com/389375899
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A
AMXmachine
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 12606 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLAN
PART: 12606 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLANUSED – GOOD CONDITIONSMODEL: VTH 35/8/2 VUMODEL: VTH 35/8/2 VULow Speed / High Torque DesignEasy AccessibilityDrive Motor HP 404-Way Indexable Cutting InsertsHigh Output “Torsion Point” Cutting RotorSevere Duty ConstructionStress-Free Frame, Robotically WeldedOversized DrivetrainHeavy Duty Powerbelt Rotor DriveHeavy Duty Spherical Roller BearingsISO 9001 ManufacturedAllen Bradley Control Panel – 460V (UL)10” diamete...
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...