ID: 1106
Open
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
PART: 12008-E – PALLET ASSEMBLY AND STACKER – INCLUDES 3 GUNS - RAYCO INDUSTRIES INC
AMXmachine
Description
PART: 12008-E – PALLET ASSEMBLY AND STACKER – INCLUDES 3 GUNS - RAYCO INDUSTRIES INC
Used – Good condition
440V, 3 Phase
Approximate space assembled: 16 x 16 feet
3 guns, stacker and exit racks included
VIDEO 1: https://vimeo.com/389375899
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOB
PART:
2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOBNew with warrantyPaper, corrugated and heavy fiber boardBEST USES - Removal of continuous film, Edge Trim and MatrixINDUSTRIES - Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foilsCAPABILITIESMaterials: Paper, corrugated and heavy fiber boardTrim Width max: 8 1/2" (...
AMXmachine
PART: 12541 - GANG RIP SAW - 50 HP - LOBO
PART: 12541 - GANG RIP SAW - 50 HP - LOBOUSED - EXCELLENT CONDITIONModel
TRS-1014220v/440v,
3ph50 Hp
motor2Hp
Feed MotorVariable
Feed: 30 - 100 FPMArbor
length: 11"70mm/2
keyway spindleAdjustable
FenceChain
in excellent conditionPush
button motor controlsLaser
AMXmachine
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETER
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS:
Diameter
Range: 1/4" ~ 3/4"Motor:
1 HP, 1 PH, 115VWorking
Speed: 24 ~ 28 FPMMinimum
Working Mate...