Identificador: 2681
Abierta
.PNG)
Descripción
PARTE: 2RI-R76 - LINE DRILL - 76 SPINDLE CNC DRILLING SYSTEM
Description:
A closet system drill part of the panel master series. Is a CNC single row system drill with programmable drill row location and boring depth. Is used for drilling full length closet panels in a single process. The drill row ball screws and linear rails provide for precision drill row location. The servo driven ball screw table feed control allows for precision drill depth control and through feed boring.
The multiple spindles and CNC control allow you to drill precise and consistent holes in a single process, significantly increasing your productivity.
Standard Features:
- 76-Spindle Gear Driven Drill Head
- (39) Right Hand, (36) Left Hand
- Touch Screen HMI
- Twin Ball Screw Drill Row Positioning
- Triple Precision Table Guide Rails
- Twin Ball Screw Boring Stroke Control
- Programmable Boring Depth, Servo Driven
- 108" Back Fence with (4) Adjustable Material Stops
- Right and Left Hand Work Stations
- (4) Pneumatic Material Clamps
- (4) Spring Operated Material Clamps
- Center Beam Mounted Cycle Start Button
- (2) Emergency Stop Buttons
- Tooling Not Included
Technical Data and Specifications:
- Drive Motors: 3 HP
- Spindle Centers: 32mm
- Collet Size: 10mm
- Throat Capacity: 24"
- First to Last Spindle: 2,400mm (94.488")
- Maximum Material Thickness: 1.25"
- Electrical: 230V, 3Ø, 60Hz, 60A or 460V, 3Ø, 60Hz, 30A
- Air: 2 CFM at 80 – 100 PSI
- Work height: 36″
- Footprint: 56″ x 110″
- Table Area: 30″ x 108″
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine1
Profile Sander
PARTE: 2LA-260 - Profile SanderIf you need to sand big or odd-shaped parts, sealer sanding or white wood sanding – this machine is for you! It features inverter-controlled variable speed spindles, and vertical adjustment.this machine can sand just about anything! not just wood and painted wood, metal too!designed for flexible brusheshandles odd-shaped parts and big parts
AMXmachine1
Hydraulic Back Corrugated Cutterhead
PARTE: 3CH-HFBB - Hydraulic Back Corrugated Cutterhead Bore that can be fits in general 4-side high speed moulders/planers.Standard specifications with single angle 12 or 20 degrees.
-500x500.png)
AMXmachine1
TORNO 32 x 80''
TORNO 32 x 80'' PARTE: 2GM-GML-3280 Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor. ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision gro...
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...