ID: 2578
Open
.PNG)
.PNG)
.PNG)
.PNG)
Description
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810M
- ISO 9001 certified
- American design and Taiwan quality machine
- HD all steel construction for maximum rigidity
- Precision driven gearbox
- Full length 30 strokes per minute
- 60” long squaring arm with inch / mm scale
- spring hold-downs
- high grade carbon/chrome alloy steel blades and hardened to 62 hrc,
2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- 6” manual back gauge with one side handwheel
- 60” long squaring arm with inch / mm scale, mounted on right side of the table
- 2 each 24” front support arms
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower blades
Cutting Capacity Mild Steel - HRS (tensile 60,000 PSI) Stainless Steel (tensile 85,000 PSI) Soft Aluminum (tensile 28,000 PSI) min. thickness |
8' x 10Ga. 8' x 14Ga. 8' x 1/4" 22Ga. |
| Blade Lenght | 98" |
| Strokes per minute | 26 |
| Worktable height | 32" |
| Front support arm | 36" |
Back gauge | 26" Manual Back gauge |
Blade Rake Angle | 2.5 Degree |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
PART: 2CK-HR11P - HORIZONTAL BAND RESAW - 1 BAND - 20 HP - 11.8” WIDE
PART: 2CK-HR11P - HORIZONTAL BAND RESAW - 1 BAND
- 20 HP - 11.8” WIDE
NEW WITH WARRANTYCan produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. Equipped with motorized thickness adjustment with digital control for convenient blade height adjustment. The HR11P ...
AMXmachine1
AFILADORA DE CUCHILLAS PARA MOLDURADORA
PARTE:
2CK-JF330 - AFILADORA DE CUCHILLAS PARA MOLDURADORAWas designed to ensure the operator can produce an optimum knife finish, while producing precisely accurate profiles. The powerful 3HP grinding motor makes knife grinding a breeze. The VFD allows the operator to dial in the optimum grinding speed no matter what type of knife steel they are grinding. Using an axial constant setup, tools can be transferred to the moulder quickly for precise and fast changeovers. The cutterhead is m...
AMXmachine1
PART: 2CK-DWM-36-E - DRAWER ASSEMBLY CLAMP
PART: 2CK-DWM-36-E - DRAWER ASSEMBLY CLAMPQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANTAGESCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths with the rapid change clampErgonomic workstation on an angle to improve production outputDouble acting air cylinders can apply pressure progressively allowing for easy fitting of the botto...
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...