Identificador: 2691
Abierta
.PNG)
Descripción
PARTE: 2RI-R258 - 8" Horizontal Edge Belt Sander
Description:
The entire platen assembly raises and lowers to give the operator use of the entire belt surface. Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.
Standard Features:
- Single Sided Ground Steel Platen
- 6-Way Adjusting Front Table
- Swing Away Safety Dust Hood with 6" End Openings for Dust Collection
- Adjustable Oscillation Stroke Cam
- Dry-Lin Oscillation Ways
- Air-Jet Belt Cleaning Device
- Tiltable End Table
- Magnetic Controls
- Oscillation/Non-Oscillation Selector Switch
Technical Data and Specifications:
- Belt Size: 8" x 144"
- Platen Size: 10" x 56"
- Oscillation: 0"- 1" Adjustable
- Drive Wheel: 7.75" x 9"
- Drive Motor: 7.5 HP
- Oscillation Motor: 0.25 HP
- Electrical: 230V, 3Ø, 60Hz or 460V, 3Ø, 60Hz
- Air: 40-60 PSI
- Work height: 36″
- Footprint: 26.5" x 87″
- Table Area: 12″ x 56″
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.png)
AMXmachine1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downsHigh grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger guardFront supports and (2) side g...
-500x500.png)
AMXmachine1
SLIDING TABLE SAW - 7.5 HP
PARTE: 2MK-BMP.3200.IR - SLIDING TABLE SAW - 7.5 HPIs a powerful sliding panel saw from Maksiwa, equipped with a 7.5HP main motor and ¾ HP Scoring motor (3 phase). The 126” sliding table is constructed of anodized aluminum and runs on precision linear guide rails that gives you an ultra-smooth movement allowing you to move the table effortlessly. Designed with a European style 51″ rip fence, it has a digital readout with a micro adjustment for fine-tuning; simply lock it in place and adjust...
-500x500.png)
AMXmachine1
EDGEBANDER
PARTE: 2MK-CBC.E - EDGEBANDERIs designed for convenience, portability, and efficiency. It has retractable legs for easy transportation. Works with edge banding tape width up to 3” and thickness 0.3mm -2mm. The built-in manual cutter provides a precise cut of the tape. With a digital temperature control panel, you can easily control the glue temperature and the glue pot capacity is 1.5 pounds (700 grams).A spiral bar raises the glue from the glue pot and flows back down, similar to a fondue ...
AMXmachine1
Series Sander
PARTE: 2LA-6000 - Series SanderWill brush sand and/or wire brush parts with standard widths from 25 to 73 inches. It has 1 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter. It has a fixed height conveyor and accommodates parts up to 9 inches thick.fully customizable to suit shop needsdesigned with a small footprintideal for sanding long thick partsruggeddependable