ID: 2685
Open
Listing ID: #2685 has been added to your wishlist.
.PNG)
Description
PARTE: 2RI-R8023 - DOUBLE SPINDLE HORIZONTAL BORER
Description:
Was designed for heavy-duty production boring applications. Spindles are designed with multiple bearings to avoid spindle drift and fatigue. Spindle centers are easily adjusted to accommodate multiple spindle boring patterns. The fixed table work height easily accommodates electronic and manual material stop systems and tables. The spindle height above the table is adjusted from the front of the machine for easy operator access.
Standard Features:
- (2) 1 HP Spindle Drive Motor, TEFC
- (2) Single Spindle Drill Head
- Belt Driven, 3,450 Spindle RPM
- 2" - 11" Adjustable Spindle Centers
- 7/16-14 R/H Female Threaded Collets
- (2) 3.00"Bore Clamping Cylinder
- (2) End Boring T-Fences
- Right Angle Tee Fence Set
- Adjustable Clamp Cylinder Height and Centers
- 1/4" NPT Filter, Regulator and Lubricator
- Foot Actuated Boring Cycle
- Tooling Not Included
Technical Data and Specifications:
- Boring Depth: 0"-3"
- Spindle Height Adjustment: 0"-2"
- Electrical: 230V, 3Ø, 60Hz, 10A or 460V, 3Ø, 60Hz, 5A
- Air: 2 CFM at 80 – 100 PSI
- Work Height: 36"
- Table Area: 12" X 24"
- Footprint: 40" x 40"
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...
AMXmachine1
EDGEBANDER - HOT AIR
PARTE: 2SS-EZ 60HA - EDGEBANDER - HOT AIROur hot air edgebander applies your preferred choice of preglued edgebanding. Reduce the amount of panels discarded due to unsatisfactory edge banding installation. It features electronic variable speed control, digital temperature control, electromagnetic end cutters, an accutrim edge trim system and more. The innovative design of this American-Made machine makes it easy to use and provides a very dependable edgebanding solution. This machine provides t...
-500x500.png)
AMXmachine1
DOUBLE SPINDLE POCKER HOLE DRILL
PARTE: 2RI-R220T - DOUBLE SPINDLE POCKER HOLE DRILLStandard Features:1.5 HP Spindle Drive Motor, TEFCFoot Actuated Boring Cycle14 Degree Double Spindle6,100 RPM Spindle Speed24" x 30" Table AreaAdjustable Fence with (2) StopsTooling IncludedTechnical Data and Specifications:Electrical: 110/120V, 60Hz, 20AAir: 2 CFM at 80 – 100 PSIWork Height: 38.25"Footprint: 34.5" x 25.25"
AMXmachine1
ROLADORA DE METAL
ROLADORA DE METALIs a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The driv...