ID: 1858
Open
Listing ID: #1858 has been added to your wishlist.
Description
PART: 2CK-M412-E - PLANER - 4 SIDES - 5 MOTORS
New with warranty
Options:
Top Horizontal Helical Cutterhead
Bottom Horizontal Helical Cutterhead
Side Vertical Helical Cutterhead
Economical and compact machine designed for professional woodworkers looking to produce a wide range of mouldings or S4S. With individual motors to each spindle you can comfortably produce a wide range of products including flooring, crown moulding, paneling, door & furniture components, S4S, and more. The electronic digital thickness control and mechanical readouts allow for fast and accurate adjustment of the spindles to produce the desired result. Equipped as standard with both infeed and outfeed tables the material is well supported during cutting operations. Its small footprint makes it the ideal solution for the small custom shop who wants to produce their own mouldings.
- Four cutting modes: Single / double / three / four-sided planing and moulding
- Designated individual motors to each spindle
- Variable feed speed from 11-52 FPM for optimum finish results
- Digital motorized thickness controller (inch / metric) for operator convenience
- Mechanical digital readouts for side head adjustment
- 3 depth of cut control plates for bottom cutterhead
- Includes infeed outfeed table for supporting material during machining
- Upgraded adjustable infeed fence for convenient depth adjustment
- See through top guard so operator can view cutterheads
KEY ADVANTAGES
- Centralized control panel to turn on and off all working units and adjust thickness opening
- Top horizontal spindle is equipped with two pattern knife for planing and moulding operations
- Left vertical spindle can be adjusted in and out manually with a mechanical digital readout for accurate positioning
Planing | Width: 13” (330MM) |
Depth: 7/16” – 9” (12 – 230mm) | |
2-Side Planing/Moulding | Width: 13-5/8″” (346mm) |
Depth: 7/16” – 9” (12 – 230mm) | |
4-Side Planing/Moulding | Width: 0 – 12” (0 – 305mm) |
Depth: 7/16” – 4” (12 – 100mm) | |
Top Horizontal Spindle | Width: 17-15/16” (455mm) |
Max. planing depth: 5/16” (8mm) | |
Max. moulding depth: 3/4” (19mm) | |
Speed: 7000 RPM | |
Cutterhead diameter: 2-7/8” (72mm) | |
Motor: 7-1/2HP (5.5Kw) | |
Bottom Horizontal Spindle: | Width: 13-5/8” (346mm) |
Max. planing depth: 1/4” (6mm) | |
Max. moulding depth: 3/16″ (5mm) | |
Speed: 7000 RPM | |
Cutterhead diameter: 2-7/8” (72mm) | |
Motor: 5HP (3.7Kw) | |
Right & Left Vertical Spindles | Max. cutting height: 4” (100mm) |
Max. cutting depth: 13/16” (21mm) | |
Spindle diameter: 1-1/4″ (31.75mm) | |
Speed: 7000 RPM | |
Max. cutterhead diameter: 3-1/2” (90mm) | |
Motor: 4.1HP (3Kw) x 2 | |
Table | Area: 1125 x 685 mm |
Elevation: 230mm | |
Power Table (Raise): 120w | |
Dust Hood Outlet | 4 – 100mm (3.95″) |
Minimum width | 0-306mm |
Minimum thickness | 12-230mm |
Feed System | Speed (Variable): 11-52 ft/min. |
Motor: 1HP (0.745Kw) | |
Machine Dimensions (LxWxH) | 1485 x 1265 x 1216 mm |
Packing Dimensions (LxWxH) | 1350 x 1140 x 1130 mm |
New Weight | 635kgs (1400bs) |
Gross Weight | 730kgs (1610lbs) |
Electrics | 230/3/60 – 48 Full Load Amps |
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”New with warrantySpecifications Engine: 9 HP gasoline Max log diameter: 22" Max board diameter: 20" Max cutting thickness: 4-1/2" Max cutting length：110" Blade speed:(Lenox): 3279FPM Shipping dimensions: 214 length x 64 width x 83 height – Weight 921 Lbs.Video: https://vimeo.com/1042508626
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
-500x500.jpg)
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60 LARGO MM
PARTE: 12108 – CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
5,100.00