Identificador: 2714
Abierta
.PNG)
Descripción
PARTE: 2PI -TSS - Trim, Score, Saw
Was designed to cut materials that are susceptible to tear out as well as pack cutting of multiple parts at the same time.
- Tear-out FREE! Absolutely no tear-out on the cut boards
- Very safe operation for the user
- More accurate than a manual chop saw
- Frame is designed to sit flat or tilted at 10 degree angle
- TigerStop ready
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.png)
AMXmachine1
DOUBLE ROW SYSTEM DRILL - 152 SPINDLES
PARTE: 2RI-R152 - DOUBLE ROW SYSTEM DRILL - 152 SPINDLESIs a woodworking machine that can drill rows of evenly spaced holes in cabinet and furniture components. Drills two rows of shelf pin holes simultaneously. It has 152 spindles arranged in two rows of 76 each, and it can drill a full 8 foot panel with precision and speed. It is designed for closet panel production and features servo driven and programmable through boring, twin ball screw boring stroke control, and right and left hand work s...
-500x500.png)
AMXmachine1
8" Horizontal Edge Belt Sander
PARTE: 2RI-R258 - 8" Horizontal Edge Belt SanderDescription:The entire platen assembly raises and lowers to give the operator use of the entire belt surface. Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.Standard Features:Single Sided Ground Steel Platen6-Way Adjusting Front TableSwing Away Safety Dust Hoo...
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE: 2PI-HP5D - Horizontal Bore, Dowel, and Panel Grooves Is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.
Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as c...
AMXmachine1
VERTICAL PANEL SAW - 74" HEIGHT X 64" WIDE
PARTE: 2SS-C5 - VERTICAL PANEL SAW - 74" HEIGHT X 64" WIDEThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to h...