Identificador: 2665
Abierta
.PNG)
Descripción
PARTE: 2RI-R200T - SINGLE SPINDLE POCKET HOLE DRILL
Designed specifically for pocket joinery face frame construction. This machine, boasting a 14-degree single spindle, a 6,100 RPM spindle speed, and a 1.5 HP spindle drive motor, delivers the most efficient and economical method of frame joinery. Notably, it can provide up to a 50% reduction in frame construction time. By eliminating dowel boring, dowel and glue insertion, clamping time, and joint misalignment, ensures flush and tight joint construction across all types of wood. Its design allows for frame disassembly and joint repositioning without the loss of material, significantly increasing system productivity. Interestingly, the design of the pocket hole drill also negates the need for glue application to the joint, further simplifying the construction process. This highly effective machine is operated via a foot-activated boring cycle, making it a standout choice in modern woodworking technology.
Standard Features:
- 1.5 HP Spindle Drive Motor, TEFC
- Foot Actuated Boring Cycle
- 14 Degree Single Spindle
- 6,100 RPM Spindle Speed
- 24" x 30" Table Area
- Adjustable Fence with (2) Stops
- Tooling Included
Technical Data and Specifications:
- Electrical: 110/120V, 60Hz, 20A
- Air: 2 CFM at 80 – 100 PSI
- Work Height: 38.25"
- Footprint: 34.5" x 25.25"
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine1
Horizontal Bore & Dowel Insertion Machine
PARTE: 2PI-H49 - Horizontal Bore & Dowel Insertion MachineIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE: 2PI-HP5D - Horizontal Bore, Dowel, and Panel Grooves Is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.
Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as c...
-500x500.png)
AMXmachine1
Profile Sander
PARTE: 2LA-360 - Profile SanderThe key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, plus a little patience and understanding. The results are a remarkable increase in consistency, quality, and productivity.wheel tilts forward or backwardremovable fencequickly make fine adjustments
-500x500.png)
AMXmachine1
DUST COLLECTOR - 5 HP
PARTE: 2MK-CPD/5.S - DUST COLLECTOR - 5 HPIs ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.Technical InformationMotor specs5 HP 3 phases 220V 20 AAir Flow Capacity2760 CFMBag volume400 L (14.13 ft³)Number of air inlet:5 (4in)Filtration2.5 micronBag size2...