ID: 2424
Open
.jpg)
Description
PART: 1AM-1150-4 – SET OF 4 KNIVE CUTTERS - HSS - FOR PALLET NOTCHER
New
4 Spare Straight HSS knives
New design for Pallet Notcher model 1AM-1150
Note:
Please contact us before buying to confirm availability
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2TP-001 - PALLET NAILING MACHINE - FROM 30X30 INCHES TO 50X48 INCHES
PART:
2TP-001 - PALLET NAILING MACHINE - FROM 30X30 INCHES TO 50X48 INCHES
New with warranty
Standard machine for 30 x 30 inches up
to 50 x 48 inches
Machine for pallets of 3, 4 and 5 stringers
Completely pneumatic, no electricity
required
Ready to work
1 person operation
Does not include nailers, any style of
nailer can be mounted
Produces 250 to 300 pallets in 8 hours
We have customers making up to 360
pallets per 8 hour shift
Virtually maintenance free machi...
AMXmachine
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL
POLE MILLING MACHINE - HAWKERNEW BLADESFOR HAWKER DOWEL POLE MILLING MACHINESMODELS: HAWKER 500, HAWKER 1500, HAWKER 2000,
ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4"
THICKNESS - (100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNES)
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...