Identificador: 2485
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PART: 12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor: 3 HP, 230/460V/3/60
Marca: Wolverine
29-1/2” wide x 70” long Belt
Motor: WEG 3HP
Approximate Weight/unit (kgs): 776
Aproximate Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed - It is fixed speed and can be changed with a controller.
Magnet power is strong - the original design was to pull small scrap metal from sand on conveyor belt.
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
SOLDADORA DE SIERRA CINTAS - 10 – 40 mm
PARTE # 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachine
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A
AMXmachine
FORMADORA – EXPANDE TUBOS – CAPACIDAD – 160 MM
PARTE:
3BE-CH-3001-A - FORMADORA – EXPANDE TUBOS – CAPACIDAD – 160 MM
NUEVA CON GARANTIA
Process capacity:φ50-φ160mm
Process tube length:500-3500mm
Process tube thickness:1.5-2.5mm
Process expansion tube length:20-120mm
Power: Hydraulic 15HP
W/ STANDARD ACCESSORIES AND TOOL BOX