ID: 2364
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PART: 12540 - PINCH ROLLER - CAPACITY 62” - EVANS
USED - GOOD CONDITION
Capacity with Solid Top and Segmented
Bottom Roller
Max.Width: 62"
Feed rate 50 Feet Per Minute
Safety Gates on in-feed and out-feed sides
Works with Contact Adhesive or PVA's white glue
Heavy Duty Construction
1/2 Hp, 8 Amps 110V Motor
Working Height: 30.5"
Max. Thickness: 2"
Air Requirement: 100 PSI
Foot Print: 74" x 28"
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
SIERRA CINTA – AUTOMATICA – CAPACIDAD 10”
PARTE: HA250W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity
Round
(Diameter) 1.18"-10"
Rectangle
(W x H) 11.8" x 10"
Work
Load Capacity 3,307 lbs.
Material
Index Stroke 15.75" (Maximum 9 Times Index)
Index
Length 0.394" x 141.7"
Saw
Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade
Speed 89-295 ft./min, 60 Hz, Stepless
Saw
Blade Motor 5 HP
Hydraulic
Pump Motor 1 HP
...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONS
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”. Angúlo máximo 35°
AMXmachine
PARTE: 1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASE
PARTE:
1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 360 - 3060 RPMCHUCK: 1.5 A 13 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 150 MMCARRERA CHUCK: 65 MMDISTANCIA DEL CHUCK A LA MESA: 355 MMDISTANCIA DEL CHUCK A LA BASE: 495 MMDIMENSIONES DE LA MESA: CIRCULAR DE 255 MMDIMENSIONES TOTALES: 920 MM X 255 MM X 540 MMPESO: 38 KGSEMPAQUE: 1 CAJA