Identificador: 2321
Abierta
Descripción
PART: 12535 - DOWEL MILLING MACHINE - HAWKER
USED – GOOD CONDITION – AS IS
2” MAXIMUM DIAMETER
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.jpg)
AMXmachine
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH - HEAVY DUTY
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH
- HEAVY DUTYNew with warranty – 6-month warranty on manufacturing
defects on mechanical parts only2 Motors 10 HP, 220/440V, 3 phase - connected to 220V2 On/Off Switch with magnetic startersMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depthEach cutterhead with 4 HSS knives installedSaw dust removal: 12.25” wide x 10.5” tall each opening in the back sideSaw dust removal: 2,300 CFM recommended, equivalent to a 3 HP d...
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A