Identificador: 2189
Abierta
Descripción
LUMBER CUT TO SIZE
15,000 - 17,000 foot - 5/8 X 3-1/4 X 64”
3,000 - 5,000 foot - 5/8 X 3-1/4 X 70”
Per truck load - every 2 weeks
LUMBER FOR PALLETS
GREEN OR AIR DRIED
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
Nueva con garantía
2GM-HBR-0425 – ROLADORA
HIDRAULICA – 4’ x ¼”, 3 HP, 220/440V, 3PH
2GM-HBR-05316 – ROLADORA
HIDRAULICA – 5’ x 3/16” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0525 – ROLADORA
HIDRAULICA – 5’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0625 – ROLADORA
HIDRAULICA – 6’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0808 – ROLADORA
HIDRAULICA - 8’ x 8Ga , 7-1/2 HP, 220/44OV, 3PH
2GM-HB...
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...
AMXmachine
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
PART:
1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE
AND STOPSIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.New
with warranty120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines7 galvanized steel ball bearing rollers-
1 back guide to avoid material to fall-
1 block stop to make same size ...
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...