ID: 2712
Open
.PNG)
.jpg)
.png)
Description
PARTE; 2PI-HPMT - Horizontal Bore, Dowel, and Panel Grooves
Has a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.
- Elimination of complicated machine setup
- Provide a stronger product
- Easy assembly by providing self aligning joints
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
CORTADORA MECANICA 8' x 10 Ga
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810MISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm with inch / mm scalespring hold-downs high grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 4-edge indexable bottom bladeFull length with full view finger guardFront supports ...
-500x500.png)
AMXmachine1
Horizontal Bore & Dowel
PARTE: 2PI-HPJ - Horizontal Bore & DowelIs a horizontal point to point bore and dowel insertion machining center. It is designed to CNC position the spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and Point to Points by shifting boring and doweling
-500x500.png)
AMXmachine1
23 Spindle Horizontal Boring Machine
PARTE: 2RI-R823 - 23 Spindle Horizontal Boring MachineDescription:Is a robust, 23 spindle horizontal borer, designed to be used as a supplemental borer for CNC nested based router and point-to-point borer applications, producing clean and accurate drilling of wood components. The workpiece is held firmly against the table by a pneumatic clamps, and there is full adjustability of the index stops, bed height, and depth of cut.Standard Features:23-Spindle Gear Driven Drill Head on 32mm Centers(12...
AMXmachine1
EDGEBANDER - GLUE POT
PARTE: 2SS- EZ 72GP - EDGEBANDER - GLUE POTThe Glue Pot Edgebander applies glue to your panel, before edgebanding it and trimming it at up to 24 feet per minute. Engineered with a temperature controlled Glue Pot, prevents glue from overheating or splattering. The Edgebander is the ideal solution for smaller woodworking shops currently edgebanding inefficiently or doing it by hand. Two industrial routers and knives provide trimming and minimizes the need to sand or file edges from material. It a...