ID: 2645
Open
.PNG)
Description
PARTE: 2MK-CBC.E - EDGEBANDER
Is designed for convenience, portability, and efficiency. It has retractable legs for easy transportation. Works with edge banding tape width up to 3” and thickness 0.3mm -2mm. The built-in manual cutter provides a precise cut of the tape. With a digital temperature control panel, you can easily control the glue temperature and the glue pot capacity is 1.5 pounds (700 grams).
A spiral bar raises the glue from the glue pot and flows back down, similar to a fondue fountain. It uses low temperature pellet glue, recommends glue that work in the range of 130° up to 180° Celsius.
| Technical Information | |
|---|---|
| Electrical specs | 1 Phase 110 V 1500 W 60Hz |
| Motor specs | 24 V 10 Amp |
| Manual Feeding Speed | 18ft/min |
| Max edgebanding Height | 3" |
| Edgebanding Coil Support Diameter | 19 1/2" |
| Tape Thickness | 0.4 - 2mm |
| Edgebanding Material | Melamine /PVC/ABS/PP/ VEENER non-fleeced |
| Glue Pot Capacity | 1.5 lbs |
| Recommended Glue Temperature Range | 130° to 180º C |
| Glue Pot Tape | Granulated Hot-Melt |
| Max. Machine Dimension | 47" x 31" x 42" |
| Shipping Dimension | 32" x 22" x 20" |
| Weight | 114 Lbs. |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
FACE FRAME ASSEMBLY TABLE
PARTE: 2RI-R200E/A - FACE FRAME ASSEMBLY TABLEScrewed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No glue require...
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE: 2PI-HP5D - Horizontal Bore, Dowel, and Panel Grooves Is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.
Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as c...
AMXmachine1
VERTICAL PANEL SAW - 74" HEIGHT X 64" WIDE
PARTE: 2SS-C5 - VERTICAL PANEL SAW - 74" HEIGHT X 64" WIDEThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to h...
-500x500.png)
AMXmachine1
EDGEBANDER
PARTE: 2MK-CBC.MR - EDGEBANDERHas a built-in retractable extension table providing a work area 3x times longer whenever opened, it is perfect for long pieces such as doors and panels and it has 6 speeds allowing the operator to work as fast as he wants.WORK AREAWhenever opened the extension tables will give you 3x the regular work area of the machine.6 PARAMETERSWith 6 speeds to chose from the feeder switch will work on your desired velocity.Technical InformationElectrical specs1 Phase 110 V 150...