ID: 2650
Open
.PNG)
Description
PARTE: 2MK-CP/2.C - DUST COLLECTOR - 2 HP
Is ideal for collecting light powder from small and medium machines such as saws and sanders. The air flow of this collector is 1,165 ft³/min, resulting in a clean and pleasant environment for your work. The large bag has a capacity of 5.4 sq. feet.
| Technical Information | |
|---|---|
| Motor Specs | 1 Phase 220V 2HP 15 Amps 60Hzs |
| Air Flow capacity | 1490 CFM |
| Fan Diameter | 12" | 305mm |
| Bag Capacity | 5ft3 |
| Number of air intel | 2 |
| Inlet size | Main:5" |125mm - Spliter: 4" | 100mm |
| Filtration | 1 micron |
| Sound Rating | 89 dB |
| Weight | 95 Lbs | 43kg |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
Horizontal Bore & Dowel Insertion Machine
PARTE: 2PI-OTF - Horizontal Bore & Dowel Insertion MachineIt is designed to belt position the workpiece, bore a hole, then advance the workpiece to the correct location for the inserter, inject glue or water (for pre glued dowels), and fire the dowel into the hole. A part is placed into the work zone referencing the back fence and advancing the part onto the belt. The belt system allows constant part feeding into the machine.Elimination of complicated machine setupQuick, accurate assemblyGain p...
AMXmachine1
TABLETOP SCREW POCKET MACHINE -1 DRILL
PARTE: 2SS-SPM101EZ - SCREW POCKET MACHINE -1 DRILLThe screw pocket machine drills a pilot hole while machining a six degree screw pocket with dual routers and an easy action lever. An “EZ” action lever allows operators to pocket as material allows in two movements, without the need for finding a neutral position.Key features of this machine include:Machining a 6° pilot hole and a screw pocket in one “EZ” motion.An “EZ” action lever allowing operators to pocket as quickly as desi...
AMXmachine1
HYDRAULIC FLAT CUTTERHEAD
PARTE: 3CH-HFB - HYDRAULIC FLAT CUTTERHEADCan be fits in general 4-side high speed moulders/planers.
AMXmachine1
Profile Sander
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...