ID: 2666
Open
.PNG)
Description
PARTE: 2RI-R220T - DOUBLE SPINDLE POCKER HOLE DRILLTechnical Data and Specifications:
Standard Features:
- 1.5 HP Spindle Drive Motor, TEFC
- Foot Actuated Boring Cycle
- 14 Degree Double Spindle
- 6,100 RPM Spindle Speed
- 24" x 30" Table Area
- Adjustable Fence with (2) Stops
- Tooling Included
Technical Data and Specifications:
- Electrical: 110/120V, 60Hz, 20A
- Air: 2 CFM at 80 – 100 PSI
- Work Height: 38.25"
- Footprint: 34.5" x 25.25"
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE; 2PI-HPMT - Horizontal Bore, Dowel, and Panel GroovesHas a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints
-500x500.png)
AMXmachine1
DUST COLLECTOR - 3 HP
PARTE: 2MK-CPD/3.C - DUST COLLECTOR - 3 HPWas developed for cabinet shops with high production. With air flow rate of 2,760 ft³/min, the CPD/3 collects dust of up to 3 machines simultaneously.Technical InformationMotor Spec3 HP 1 phase 220 V 15 AAir Flow Capacity2,760 CFMFan Diameter12" | 305mmBag Capacity15 ft3 | 0.43 m3Number of air Inlet3Inlet sizeMain: 6" | 150mm - Spliter: 4"/100mmFiltration1 micronSound Rating89 dBWeight128 Lbs | 58 kg
-500x500.png)
AMXmachine1
DOOR CLAMPING TABLE
PARTE: 2RI-R450V - DOOR CLAMPING TABLEIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square asse...
AMXmachine1
PART: 12592 - SHREDDER - BALEMASTER - MODEL 1440 - 30 HP – 63”
PART: 12592 - SHREDDER - BALEMASTER - MODEL 1440 - 30 HP – 63”USED - GOOD CONDITIONMotor Leeson 30 HP, 3/60/208-230/460 Volt, 1785 RPM