Identificador: 2661
Abierta
Descripción
PART: AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used - Good condition
Made in USA
Two (2) saws fixed at 45° angle (saw heads are adjustable up to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle connected to 220V
3,900 blade RPM
Back fence
2 New On/Off Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting capacity with 10" blades: 2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter saw blades can be installed
Table height 35-1/4"
1 Pneumatic pedal and 2 pistons to hold down the wood pieces in the table at the time of cutting
Each cut takes 4 to 6 seconds
Machine dimensions: 32” length x 48" width x 53” height - Weight: 560 lb.
Shipping dimensions: 48” length x 48" width x 58” height - Weight: 590 lb.
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachine
PARTE: 2MA-FP-2560CB – LIJADORA - CALIBRADORA DE METAL – 25” ANCHO - 2 LIJAS
PARTE:
2MA-FP-2560CB – LIJADORA - CALIBRADORA DE METAL – 25” ANCHO - 2 LIJAS
NUEVA CON GARANTIA
Standard
Features:
Motorized
Table Lift, with digital readout
Variable
Speed Conveyor
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to
Re-adjust
the tracking system when running extremely out of parallel belts
Heavy Duty
Table Support
Double
Infeed & Outfeed Pinch...
AMXmachine
PART: 12190 - WIDEBELT SANDER - 3 HEADS - 52" WIDE – TIMESAVERS
PART: 12190-E - WIDEBELT SANDER - 3 HEADS -
52" WIDE – TIMESAVERS
USED - VERY GOOD CONDITION50 HP, 460/60/3, 12" diam. rubber contact
drum with hold-down shoes50 HP, 230/460/60/3 platen with hold-down shoes40 HP, 230/460/60/3 platen with hold-down shoes5 HP, 208-230/460/60/3 feed system motor with
Poweflex VFDPowered up/down conveyor with digital ProScale
readout75" abrasive belt length, electric eye
tracking, & motor load meters6 dust outlets 6" diameter9-1/2' x 7-1/2' x 8' approx. ov...
AMXmachine
PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALL
PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALLUsed - Good conditionBAKERBBR-0 / ABXFeatures the frame and headrig of our "BX" model, but use an "AX" model conveyor belt. This means that the head-rig can be adjusted up or down and the conveyor stays at a fixed height.Because the conveyor belt stays at a fixed height, it is easier to interchange and integrate with other material handling systems in your facility. This versatile band resaw is perfect for those who need a s...