ID: 2662
Open
Description
PART: AMX-10042 – CHAMBER HEAT TUNNEL - HOT AIR OVEN - WELDTRON – 6028
USED – GOOD CONDITIONS
MADE IN THE USA
MODEL # 6028
VOLTS: 230
CYCLE: 60
PHASE: 3
AMPS: 44
FWO: 31627
WATTS: 15
MANUFACTURER: WELDTRON CORPORATION, NEW JERSEY, USA
TUNNEL APERTURE: 7-1/2" HIGH X 22"WIDE
MACHINERY DIMENSIONS: 76" LONG X 34" WIDE X 63" TALL - WEIGHT 662 LB
MACHINE WILL BE WOOD PALLETIZED FOR SHIPPING
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO 2GM-BB-412-6HD 4 PIES LARGO x 12 Ga.2GM-BB-612-6HD 6 PIES LARGO x 12 Ga.2GM-BB-812-6HD 8 PIES LARGO x 12 Ga.2GM-BB-1014-6HD 10 PIS LARGO X 14 Ga.Standard Features- ISO 9002 certified- Large 1-9/16” beam opening, adjustable- 1” beam adjustment ( front and back )- Total pieces fingers assortment:- BB-412-6HD: 2”/1pc, 3”/4pcs, 4”/2pcs, 25”/1pc- B...
AMXmachine
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART:
12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
AMXmachine
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL
POLE MILLING MACHINE - HAWKERNEW BLADESFOR HAWKER DOWEL POLE MILLING MACHINESMODELS: HAWKER 500, HAWKER 1500, HAWKER 2000,
ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4"
THICKNESS - (100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNES)
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...