Identificador: 1525
Abierta
Descripción
PARTE: 2TA-TG-9330 - AFILADORA DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIA
FEATURES:
- Economical model for small shop.
- Work table back to front, left to right is moved on linear bearing cross roller rail sets, accuracy and durability.
- Grinding wheel head is micro adjustable and accurate. 2 HP variable speed control motor for powerful grinding.
- Easy setup template holder for accurate copy tracer.
- Knife-edge angle is adjusted by dovetails are grooved; grinding center is never changed, no matter what the angle is.
- Water splash guard and coolant tank are made with stainless steel to protect from rust.
- Easy and efficient to operate.
- Heavy sheet metal cabinet stand and cast iron body.
- High precision and durability.
|
SPECIFICATIONS |
2TA-TG-923 |
2TA-TG-9330 |
|
Grinding Capacity |
||
|
Cutter (Dia. x W) |
12" x 10" |
12" x 12" |
|
Grinding Wheel Size |
7.5", 60mm Dia |
8" x 2¼" |
|
Grinding Head Travel |
13" |
13" |
|
Grinding Wheel Speed |
1500-4500 RPM (Var) |
1500-2900 RPM (Var) |
|
Grinding Wheel Motor |
2 HP |
2 HP |
|
Coolant Pump Motor |
1/8 HP |
1/8 HP |
|
N.W. (LBS) |
1050 LBS |
1100 LBS |
|
G.W. (LBS) |
1450 LBS |
1500 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532
PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532
USED – VERY GOOD CONDITION
2019 Rover A Smart 1532
Machine located in Northern, CA.
Available for inspection still under power
Pictures are from 12-18-2023
-500x500.jpg)
AMXmachine
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH - HEAVY DUTY
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH
- HEAVY DUTYNew with warranty – 6-month warranty on manufacturing
defects on mechanical parts only2 Motors 10 HP, 220/440V, 3 phase - connected to 220V2 On/Off Switch with magnetic startersMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depthEach cutterhead with 4 HSS knives installedSaw dust removal: 12.25” wide x 10.5” tall each opening in the back sideSaw dust removal: 2,300 CFM recommended, equivalent to a 3 HP d...
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.