ID: 2679
Open
.PNG)
Description
PARTE: 2RI-R19F - 23 Spindle Single Row Line DrillTechnical Data and Specifications:
Description:
Is the mid level model in the line boring drills that Ritter Machinery has to offer. Is both affordable and built to last. Is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. Is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fence is adjustable allowing you to set your row offset from the edge. The pneumatic cycle allows hands free operation of the machine by using a foot pedal.
Standard Features:
- 23-Spindle Gear Driven Drill Head on 32mm Centers
- (12) Right Hand, (11) Left Hand
- 60" Back Fence with (4) Adjustable Material Stops
- Right and Left Hand Work Stations
- (2) Spring Loaded Index Pins
- (2) Spring Operated Material Clamps
- Adjustable Boring Depth
- Pneumatic Driven Boring Cycle
- Tooling Not Included
Technical Data and Specifications:
- Drive Motor: 3 HP
- Spindle Centers: 32mm
- Collet Size: 10mm
- Throat Capacity: 12"
- Maximum Material Thickness: 1.25"
- Electrical: 230V, 3Ø, 60Hz, 20A or 460V, 3Ø, 60Hz, 10A
- Air: 2 CFM at 80 – 100 PSI
- Work height: 38.25″
- Footprint: 36″ x 60″
- Table Area: 14″ x 48″
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
DOOR CLAMPING TABLE
PARTE: 2RI-R450V - DOOR CLAMPING TABLEIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square asse...
AMXmachine1
13 Spindle Single Row Line Drill
PARTE: 2RI-R113 - 13 Spindle Single Row Line DrillIs the entry level model in the line drills RITTER has to offer. Is both affordable and built to last. The R113 is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fence is adju...
-500x500.png)
AMXmachine1
EDGEBANDER
PARTE: 2MK-CBC.E - EDGEBANDERIs designed for convenience, portability, and efficiency. It has retractable legs for easy transportation. Works with edge banding tape width up to 3” and thickness 0.3mm -2mm. The built-in manual cutter provides a precise cut of the tape. With a digital temperature control panel, you can easily control the glue temperature and the glue pot capacity is 1.5 pounds (700 grams).A spiral bar raises the glue from the glue pot and flows back down, similar to a fondue ...
AMXmachine1
LINE BORING MACHINE - 1 HP
PARTE: 2MK-LBM.13 - LINE BORING MACHINE - 1 HPLoaded with features such as the lubricated aluminum head, heat treated steel gears, 1 HP motor and stainless-steel spindles. These machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!Technical InformationMotor1HP 110V 1 Phase 10A 60 HZPrewired110 V, Single – Phase – 10 A / 5 ATable Size31"x 15 1/2"Spindle Speed3.450 RPMFence Stops2Expandable Fence GuideMax 8...