ID: 2422
Open
PART: AMX-10055 - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME MANUFACTURING
AMXmachine
Description
PART: AMX-10055 - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME MANUFACTURING
USED – GOOD CONDITION
Brand: Craft Inc. from South Attleboro Massachusetts
Model: COBRA AHM-01
Serial: 079
127V, CE
36 reels included with approximate 6000 hangers each reel
Machine dimensions: 72” length x 26” wide x 62” height
Shipping dimensions:
Machine: 32” width x 79” length x 66” height - wood pallet
Reels: 28” width x 30” depth x 60” height - wood pallet
Palletized for shipping, Will load into truck
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINE
PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINEFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees...
AMXmachine
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
AMXmachine
PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATS
PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATSYear: 2012Specifications:Working Field:
X - Axis: 3280mm = 129.1"
Y - Axis: 1320mm = 52"
Z - Axis: 170mm = 7"
6 = ATS Panel Support Rails
Biesse's ATS - auto locating pods
Panel Lift Supports for Loading & Unloading
of Sheets
Multi Zone Working Areas
Front, Rear & Side Stops
17.7 HP HSD Electrospindle - HSKF63
12 Position Rotary Tool Changer
BH 17L Boring Head w/ quick change system
10 - Vert. Spindles - ...
-500x500.jpg)
AMXmachine
PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD
PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.This product is hand tool only please remember to get the right grit 8" flap wheels for your job.